Snap Together Tenkara Spool
Print Profile(2)
Description
Tenkara Spool
Keep your tenkara lines tangle free and ready to go. This spool has a a ton of notches, hook keeps, and magnets to accommodate however you want to store your line, on the rod or off, wound from either direction, hook on or off. The design allows the foam inside to be seen from all angles helping to keep it visible when you inevitable set it some where, or letting you color code by line type, length, etc. if that's your thing.
Parts:
- 2 - Top/Bottom pieces
- 1 - Spindle
- Foam Disc 63mm x 8mm (I use 4x 2mm thick discs - see included template for sizing)
- 8 - 6mm x 2mm magnets
Assembly
- Print Parts
- Cut Foam
- Snap the spindle into the bottom, make sure to align the notches on the bottom and the spool. It takes a bit of force to snap them together.
- Add foam to the spindle and snap the top on, it squeezes the foam and is a tight fit.
- Glue magnets into the holes on the top and bottom if you desire.
Support My Work
I have a lot more designs for outdoors gear coming, If you want to support my work you can help out here: https://buymeacoffee.com/abiv
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)