Search models, users, collections, and posts
Cycling Laptop Stand
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
2.8 h
1 plate
Open in Bambu Studio
Boost
51
189
8
3
87
40
Released
Description
Boost Me (for free)
These designs take time (and filament) to develop.
Help support my creations with a boost!
Needed a laptop stand just in time for the offseason. Designed this to accommodate 3 x 1" dowels.
- Install the dowels with glue or epoxy.
- The dowel holes are slightly undersized (0.975" dia). Most of the dowels I found were not exactly 1".
- I used E6000 glue in the holes and on the dowels, and let it dry for 24hrs.
- Install a piece of wood or board as the top.
- I used ¼" wood screws to fasten the top to the print.
- I went to IKEA's re-use section and found a flat cabinet that fit my laptop and phone stand perfectly.
It's by far and away not perfect. Everything has a little flex to it, but its working perfectly for me in a pinch!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)