Costco F1 RC Car Wall Hanger - Free 3D Print Model

Search models, users, collections, and posts

staylor1007

Hobby & DIY>RC

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 50% infill

Designer

29 min

1 plate

4.9(19)

Open in Bambu Studio

Boost

161

335

234

Released

Description

This is a wall mount/hanger for the Costco F1 RC car. It uses the front bumper (the bumper that protects the front wing) to hang instead of the wing. So it slots in between the bumper and the wing. If you've removed the front bumper it may not work.

The hole sizes are 2mm, I used a 3mm thick screw so as long as they are close to 2mm it should work.

I used just standard PLA and it has been plenty strong. The car isn't that heavy.

Note:

I've only tested this with the Ferrari version of the car. If you have a different version it may be a good idea to first measure your car to make sure this will work. I put measurements of the part in the photos.

f1 rc car wall hanger

wall mount

f1 rc car wall mount

costco f1 rc car wall mount

Comment & Rating (35)

@AgatesForever

Print Profile

0.2mm layer, 6 walls, 50% infill

Thanks for sharing this! (Although I have the Red Bull!)

The profile uploader has replied

@staylor1007

I’m glad this worked for the Red Bull too!

@user_2258784885

Where can I purchase this hanger for my costco ferrari F1 RC?

The designer has replied

@staylor1007

If you can’t print it I can list it on my Etsy shop for you. just let me know and I’ll get it up there.

@user_2258784885

Replying to @staylor1007 :

What will be the cost on etsy?

@staylor1007

Replying to @user_2258784885 :

not sure, $3 plus shipping?

@Sgambaro

Boosted

Works perfect! So glad you designed this so I didn’t have to.

@ccecchetto

Print Profile

0.2mm layer, 6 walls, 50% infill

thank you for this file this is great so happy completes my display

The profile uploader has replied

@staylor1007

Looks awesome! I’m glad to hear it worked out for ya!

@wickedhabits

Boosted

Print Profile

0.2mm layer, 6 walls, 50% infill

This thing worked great. I scaled it up to 225% for a buddy to use in his race car trailer to store his wheel wrench on the wall. The red bracket is the regular size. The next 3 were 200-225-250%. Great file to print

The profile uploader has replied

@staylor1007

That’s awesome! Glad it worked out for multiple uses!

@fballersoucant

Print Profile

0.2mm layer, 6 walls, 50% infill

The profile uploader has replied

@staylor1007

looks great!

@user_2138776235

Print Profile

0.2mm layer, 6 walls, 50% infill

Quick and easy print. Couple of small artifacts that are maybe from the slicer.

@user_2202325313

Print Profile

0.2mm layer, 6 walls, 50% infill

@DadBodLab

Boosted

perfect fit, quick print.

@Chobo

what size screw did you use? ty!

The designer has replied

@staylor1007

I used a screw that was roughly 3mm wide and 33mm long. The hole size is 2mm so as long as it’s around that it should work. I can upload a version with bigger holes if that would help.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.