Whetstone guide for stone size 210X70X10 (Remix)

The sled did not have the right dimensions for my Naniwa Japanese Whetstones and Shapton glass so i did a remix. 

Please let me know if you want another angle on the sled.

Here is the original text:

Key improvements in this model include:

• Integrated stoppers: Stops for the runner are included at both the start and end of the base to prevent the knife from going off the stone
• Extended base: The base has been extended to allow the runner to use the full length of the stone by default
• Simplified connector: A streamlined base-to-runner connection reduces friction for smoother operation (see post processing)

Tips For Printing With Custom Settings:

• Make sure the seam is not on the runners or in the runner groove
• Rotate the prints so they are not parallel to the X or Y axis. Use e.g. 45 degrees. Placing them parallel to X or Y can cause heavy artifacts around the degree marking on the runner

Post Processing:

If the sled is not running smoothly, sand down the runners a bit with 180+ grit paper. If it still isn't running 100% smoothly, you can try applying some dry lubricant to the runner grooves.