Apple watch compact travel case - Free 3D Print Model

Search models, users, collections, and posts

via-justa

Hobby & DIY>Electronics

IP Report

Print Profile(6)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

V2 0.2mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

4.8(263)

0.2mm layer, 2 walls, 15% infill + supports

36 min

1 plate

4.8(59)

V2 with logo, no text

58 min

1 plate

5.0(1)

V2 con logo

1.4 h

1 plate

Click to see more

Open in Bambu Studio

Boost

1186

3496

424

335

3.5 k

2.8 k

Released

Description

Boost Me (for free)

Your boost is appreciated and allows me to experiment with new cool designs

I took inspiration from other Apple Watch charger cases and designed one that is as small as possible (70x42.5x21mm).

One other major change from the ones I found is that they use a cover that snap and I prefer sliding cover as it's less likely to pop open and easier to work with.

I managed to fit my USB-C charger cable nicely inside without much issue. Getting the charger itself into the hole requires a bit of force as the tolerance is small to ensure it's staying in-place.

I heard and listened to your issues and V2 Is now available:

V2 includes the following changes:

Bigger opening in the cable connector (4.2mm) to support older cables with sleeve on the charger connection
Bigger space between the charger and the wall for easier threading of the cable
Rounded edges to reduce chance of damaging the cable
The case itself stayed the same size!!

I printed it on my Bambu A1 mini with 0.2 mm layer with support in standard speed (it won't work great in higher speeds)

I published a matching cable organizers at the same size for a matching set.

Or checkout my newer charger case

Comment & Rating (424)

@Beatherotty

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill + supports

Appreciate V2 as this worked fine for me.

@via_justa

is it an original cable? It looks different from what I got with my watch.

@Beatherotty

Boosted

Replying to @via_justa :

yes, came with the watch when bought from Apple.

@via_justa

Okay, that’s interesting. what model is it? if you have a caliper and can tell me how thick is the connection, I can update the model to fit it.

@KUSMIJN

Print Profile

0.2mm layer, 2 walls, 15% infill + supports

Fantastic print! It didn’t fit my old watch 3 charger (USB-A, thicker cable near the charge puck) but this was easily resolved with a small file. Love how the cable can be fully tucked away as well, just a superb case that will go with me everywhere! thank you for sharing

@via_justa

that’s a really cool color!

(Edited)

@via_justa

Replying to @via_justa :

I uploaded v2 that should fix the issues with older cables. Feel free to try it out :)

(Edited)

@rico_3346829445

Which filament did you use for printing? The colour looks nice.

@user_1382905169

Perfect impression but impossible to insert the Apple Watch charger I tested with another Apple Watch charger and the problem persists

The designer has replied

Show original

@via_justa

If you used the uploaded profile it should fit snugly as it did for everyone else. Use a bit of force on the edge of the charger opposite to the cable.

@user_1382905169

Replying to @via_justa :

I had to lightly scrape it using a scalpel, and it fits perfectly Thank you very much

Show original

@via_justa

Replying to @user_1382905169 :

My pleasure :)

@user_1284212861

Boosted

Great model and printed nicely in petg :) would be great to have it modified so the last loop of cable can be enclose. Thanks

The designer has replied

@via_justa

it’s not meant for the USB-A cable, if I remember correctly, that cable was a bit longer than the USB-C one.

@user_1284212861

Boosted

Replying to @via_justa :

Thanks :)

@mjoetoe

Print Profile

V2 0.2mm layer, 2 walls, 15% infill

had to use some sand paper but nice design!

@Skonk

Print Profile

0.2mm layer, 2 walls, 15% infill + supports

it is a little tight inside, and had to cut some of the support away, and likely have to sand some down, but looks fantastic!

@via_justa

I know, I had to make the cable guides inside very thin to get to that target size :) I found that printing it with snug support makes the support easier to remove with a small screwdriver (I use watch makers screwdrivers to remove support on my prints). Glad you liked it! Honestly I'm surprised how many people printed it already.

(Edited)

@HenryWebb

Print Profile

0.2mm layer, 2 walls, 15% infill + supports

love it works great for keeping my watch in a good area to charge.

@dv.o_danonescu

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill + supports

works!

@via_justa

Amazing! Thanks for the boost!

@MadDog2125

Print Profile

V2 0.2mm layer, 2 walls, 15% infill

Very useful case!

@Yorrick2437

Great I would call it the best Apple Watch charging cable organizer in the world it prints quickly

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.