Custom Lithophane LED Lamp with remote control

Custom Lithophane LED Lamp with remote control

This model can hold up to four (4) pictures.

You can use the standard LED strip light from 10 ft to 20 ft long (it could be longer but it is not necessary for this model, if you have a longer LED strip you can use it) . Also you can use either the battery or the USB one. 

Note: if you will use a LED with USB cable you need to use the Lamp base with usb cable slot file.

Material: PLA or PETG (This model was designed for PLA, it works with PETG as well)

Our picture measurements are the following:

119.5 mm x 110 mm (it will fit perfectly in the frame if you use those parameters) 

Thickness 3 mm

Border 5 mm

Thinness layer 0.8 mm

Vector per pixel 4

Base stand depth 0

Curve 0

For the picture you have to use an online picture converter to STL.

Here you will find one of the free Lithophane converters links available in case you need it. 

https://3dp.rocks/lithophane/

Please help us boosting our model, 

If you have any question please let us know,

Hope you enjoy it! :-) 

Thank you!

3DideasPR