Warrior Paladin

Project: Warrior Paladin
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200.01x184.38mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA dark grey Transmission Distance: 0.8
    PLA oro Transmission Distance: 1.4
    PLA  White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to grey
    At layer #12 (1.04mm) swap to oro 
    At layer #15 (1.28mm) swap to White for the rest.