Replacement hook for OXO Goodgrips Squeegee

Summary

Simple 3-part print to replace the hook for an OXO goodgrips wiper blade squeegee. Print all three parts and depending on how tightly they fit together, either push the parts together or glue them together with superglue. The finished assembled piece should snap into the squeegee handle. I printed at .4mm for the sake of speed, and it will look better at a higher resolution.

Print Settings

Rafts: 

No

Supports:                      

No

Notes: 
 

Print the legs at 100% infill for strength. I printed the hook and cone at 50%, but 30% is probably fine, too.