Wall System for Fanttik Portable Vacuum x100
Print Profile(1)
Bill of Materials
Description
Easy Mount System for Fanttic X100 Vacuum.
Boost Me (for free)
Please consider a boost!
Additional Supplies
- 8 M3X12 screws ( I use these https://a.co/d/69hFtkK )Or superglue (M3X10 or even 8 should work too)
- 2 wall mounting screws (use anchors if not going into a stud)
Attach brackets to the holder. Screws should be flush so as not to interfere with the wall. (Left and right are labeled. I labeled it as if you were looking from the back as you screw the pieces together)
Next mark where your holes using a level and your print. Make your holes and put in your optional anchors.
Use the provided holes to screw in your mount.
You are all set!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)