Giant 1-Up

You might already know my tiny 1-up keychain. But how about going bigger? How about a Giant 1-Up?
For this mushroom you are the extralife!

This 1-Up uses your whole big printer. So sorry, no A1 Mini profile this time. 

The shroom will waste more than 1.2kg filament and takes a day to print (in six batches). Do not say, I have not warned you!

Print preparation:
Make sure that your print bed is clean and grease-free and use quality brand and dry filaments. I cannot stress it this time enough: You need a clean build plate. Otherwise you print will fail! So wash your build plate with soap and water now. The sheer size of the print increases the risk of a bed adhesion issue.
If you can, use the new Supertak Build Plate. The bed adhesion is excellent.

Print settings:

Use the 0.28mm draft settings for everything. I like to reduce the speed of the outer walls to improve the quality and the stability of the print. Support is not necessary but a brim for everything is highly recommended. Use four walls, seven tops, five bottoms and variable layer height. This will give your print a smooth look on all round surfaces.
Now comes the important part: Use 35% lightning infill - this will reduce print time and filament use drastically.
See my 3mf file for details.

Assembly:
Glue the spots to the cap and the eyes to the stem. Then put the cap on the stem. You can use glue to secure the cap, if you want.

Advice:

If you print the stem without any bottom you can fill it with stones or even concrete afterwards. This will make the model very heavy - perfect for outdoor use.

And now hide it in the garden and scare your cat! 

1-Up!

If you want to support me you can leave a tip at ko-fi.com/blecheimer.

Disclaimer:
This model is fanart. It is only for decoration and will NOT give you an extra life. So do not do anything stupidly dangerous…
This fanart work by blecheimer is licensed under a Standard Digital File License. It is for personal use only (e.g. printing, gifting, presenting, showing). All files and any prints of it must not be used commercially. Any form of charging money or collecting fees for this model is strictly forbidden.
Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, adaptation or derivates in any form or format is prohibited. This includes remixes. Copying or hosting this model to other digital websites, online stores or cloud services in general is not allowed.