TOPDON TC001 case holder

This is a basic mount/holder for the TOPDON TC001 Thermal Imaging Camera. It should also work with the TOPDON TC002 camera, which is just the iPhone version of the camera. 

The is meant to hold the CASE the camera came in, not just the camera itself.

It has screw holes to mount the holder on either the back or on the right side (when facing the holder opening). The side mount option includes holes on the left side to allow a long screwdriver/bit to pass straight through the model and allow the screws to be easily tightened. If you need to mount it on the left side (when facing the holder opening), just mirror the model in Bambu Studio (right-click model → Mirror → Along X Axis)

There are two small raised ridges inside the model that provide a small amount of squeezing pressure on the case when it is placed in the holder. Whichever way you mount the holder, the case should be inserted in the same direction the raised ridges are running.