Little Tikes Story Dream Machine Cartridge Holder - Free 3D Print Model

Search models, users, collections, and posts

NoShieldAllFlesh

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.28mm layer, 2 walls, 5% infill

Designer

10.8 h

1 plate

4.3(3)

0.28mm layer, 2 walls, 5% infill

Designer

11.6 h

2 plates

Open in Bambu Studio

Boost

157

112

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Description

My son got the Story Dream Machine for christmas and he loves it. Of course you have nowhere to put all these dang cartridges everyone buys for it now so in case you needed some storage, here you go.

I and some others had trouble with a little snug fit for little ones pulling out the cartridges do a .5 in the x/y hole compensation and this should fix the issue or increase the overall dimensions by .5 -1 % and it should be perfect for little hands

IN THE SECOND PRINT PROFILE WITH THE MAGNETIC CHARACTER BASE DO NOT INCREASE DIMENSIONS!!

IT HAS ALREADY BEEN DONE FOR YOU!!!

Comment & Rating (9)

@DawnD

Print Profile

0.28mm layer, 2 walls, 5% infill

Corner broke easily on top.

@lippfamily4

I've been trying to print this, but I keep getting an error message that the object is in the exclusion zone. Tried on X1Carbon and P1S. Same message. Nothing I do can get the error to go away.

The designer has replied

@NSAFJesse2018

never had that error myself is it by chance maybe enlarged a little bit, make sure the width of each cartridge slot is 51 mm and scale to size

@user_666292926

Replying to @NSAFJesse2018 :

Hi, the issue is that the shelf is a little bit too tall to print with AMS, looks like i would need to do this workaround to print as it is: https://forum.bambulab.com/t/exclusion-area-p1s-printplate/68543 Any way you can make the second option with one less row so all this doesn't need to be adjusted? This is on my P1S. This is really cool, glad you made this!

@NSAFJesse2018

Replying to @user_666292926 :

you can just cut it in the studio using the cut feature, thats how i got the top section for the magnetic figure plate

@speabr0

Print Profile

0.28mm layer, 2 walls, 5% infill

model is neat. the tolerances are a bit tight. my kiddo can't get them out by herself.

The profile uploader has replied

@NSAFJesse2018

if you do try printing it again try the x/y hole compensation and do .5 that should be enough, my apologies I hope you get one that turns out perfect

@pureglasscannon

Boosted

My daughter loves this.

@jmwaldrip

Print Profile

0.28mm layer, 2 walls, 5% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.