Monument Valley (Perfect Fit for 001 Lamp)

Inspired by the game Monument Valley, this minimalist night light is aesthetically pleasing even without illumination~

Printing Suggestions:

• No supports are required; a flawless print is achievable provided your filament and printer are functioning correctly. Free from troublesome overhangs and difficult-to-remove supports, this model is perfect for beginners—foolproof operation simply requires clicking the "Start Print" button and awaiting your majestic castle.

• Castle Dimensions: 130*209*80mm
• Base Dimensions: 130*20*80mm
• Recommended Material and Color: PLA Matte White is recommended for an exquisitely detailed finish
• Infill can be adjusted to your preference; the default is 10%, but it can also be set to 0%, saving approximately half your filament and time(though this may compromise structural integrity)

• Layer height defaults to 0.2mm; no specific build plate adhesion requirements exist as the contact surface will not be visible.

   

The Princess Ida and Crow models are from the artistMartin Moore 

Ida:https://www.myminifactory.com/object/3d-print-monument-valley-princess-ida-23797

Crow:https://www.myminifactory.com/object/3d-print-monument-valley-crowman-23795

(The original artist's Ida model appears to be missing a connecting piece; 502 adhesive will be required. All parts are scaled to 60% for printing)

Print Showcase:

Assembly Guide:

1. Insert the Bambu MH001 light fixture into the base (wiring recesses are pre-provided)

   

2. Align the base bottom with the castle top and insert

To minimize visible gaps and maintain aesthetics, the slots are designed to be snug. Initial assembly may require some effort; gently work the pieces back and forth to ease insertion. Subsequent insertions will be considerably easier.