Ark Modular Filament Rack

Description:

The Ark Rack, the modular filament and spool storage. This storage solution has incredibly strong attachment points and snug fitment without being overly tight. I have the print profile set up to use slim tree supports that are easy to remove and without the fuss many of us have experienced when removing supports previously. Post-processing should be minor as the supports can be easily removed with a basic pair of pliers. No additional hardware is required for assembly, everything is fully 3d printed.

Everything was designed to fit on the A1/P1S/X1C build plate volume easily.

I was originally inspired by The DapRack by ChadMikeInnis, however I was unhappy with how brittle the attachment points were in his design and how tight the tolerances were when printing in PLA. To give credit for his original work and as the inspiration of this project, I've done my own spin on the DapRack's design language. What this means to you is the final product will look and feel sleek, strong, and feel very solid even when you accidently bump into it. 

If you enjoy my design, please consider leaving a boost. It's costs you nothing, but it gives me a dollar for my hard work :)

Assembly & Print Instructions:

For level 1 of the Ark Rack, you will need to print 2x Ark Cores and 1x 1st level supports and feet plates. This will hold a total of 2x 1kg spools of filament. To expand horizontally, repeat the print process. To expand vertically, you will to print 1x Ark Core and 1x 2nd level and above supports build plates. To continue building vertically, repeat this process as needed. No additional hardware is required for assembly. No screws, no glue, no sanding. Everything should fit together snuggly and work right off the print bed with the settings provided.

I've also included end caps in the design. They are for aesthetic purposes only and provide nothing functional other than a “clean” look. Feel free to skip these if you want, as the Ark Rack is fully functional without them. 

I do recommend sticking with PLA or PLA + from any major brand as the design has been optimized around them. I'm sure PETG would also work, but as PLA is more common and budget friendly… ultimately up to you.

If you have any questions or issues, please feel free to comment below and I'll get to it as soon as possible. 

Happy printing!