The print is nice and love the design, but there are definite settings that need to be figured out and adjusted before printing. First thing remember to paint the bottom of the heart or it will have a yellow first layer. secypu will need to do some purge testing and adjust the setting or you will get red and black banding. Again over all great design.
This right here is the main reason why I personally always look over painted items [from others] before sending it. Also check the flushing, to make sure the bleeding doesn't happen like it did for you. :/
For All Multicolor x1-x28 or big 175cm - 3 plates - 0.16mm layer, 2 walls, 15% infill
this printed great. I had to make a new one for my granddaughter. her old one had a heart tail and I couldn't find it. so I choose this one the only change I made was increased the infill to 25% for more strength. took 48+ hours had some bleed with the black my fault didn't purge enough. still it looks great
I am satisfied with the result, the only thing I changed was the size, I printed at 125% and also rewrote the filling to gyroid and for better cooling I oriented the model facing the side fan.