Bolt action toy (UPDATED LOOK)

This is a second edition of my bolt action toy, this time with a sleeker build, less mechanical parts, and a better mechanical feel when loading and unloading. It's small enough to fit in a pocket or bag if you wish to take it with you, and is durable enough to flip it open and closed over and over. Neither tools nor glue is needed to assemble. 

OBS: this toy requires careful assembly as the mechanics itself are made of small parts which aren't fragile but can break if pulled or twisted too hard. 

To begin assembly I recommend first pushing the bolt in backwards (see first assembly guide), rotating it and carefully sliding it along its guided path inside the chamber. This is to make sure that the bolt pin is not broken off during use. 

When complete you can start assembling the toy itself, insert the bolt handle in it's locked position (see second assembly guide picture) and then CAREFULLY sliding the bolt into the chamber. This step requires you to make sure that the bolt pin enters the guide rail opening, if it isn't inserted correctly you risk breaking off both the bolt handle and the bolt guiding pin. 

When the bolt handle and bolt are pushed together correctly you should now be able to twist the bolt handle upwards and carefully pull out the whole assembly. Be careful the first time as the plastic might have friction that needs to be worn down by a couple "loadings." 

Please leave any suggestions you have or if you encounter errors and I will try to address them as soon as possible. Thank you.