Frida Kahlo HueForge
Print Profile(1)
Description
Inspired by this one (https://makerworld.com/de/models/584022?from=search#profileId-505210), I have created a more colorful version.
In case of using only one AMS, change color at layer 21 back to black.
After color changed to blue remove the black Filament an insert white.
Increase the cleaning volume from blue to yellow. i didn't do it and that's why it's more green than yellow.
If you change the size, remember that only x and y may be changed.
Z may not be changed.
Imagesource: https://pixabay.com/de/illustrations/frida-kahlo-k%C3%BCnstler-bilder-8749242/
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.28x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Marine Blue
At layer #17 (1.44mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)