Sharpening jig for chisels or plane blades - Free 3D Print Model

Search models, users, collections, and posts

ChriZ

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.8(14)

Dual-roller sharpening guide

Designer

1.6 h

1 plate

4.6(17)

Open in Bambu Studio

Boost

196

727

481

313

Released

Description

Content has been automatically translated.

Show original

Here I have a small sharpening device for chisels or plane blades. The sharpening jig has an adjustable stop to ensure that the tool is sharpened straight, as well as a folding protractor with angles of 30°, 25°, and 22.5°. The rear end of the blade must be at the height of the line so that you can sharpen at the respective angles.
For assembly, two square carriage bolts (M6) and two wing nuts are required.
For the wheel, you have two options: either print the long pin and the large solid wheel, or print the two cylinders and combine them with two ball bearings with an inner diameter of 8mm and an outer diameter of 16mm, using an M6 screw for this.

chisel

sharpening guide

Comment & Rating (41)

@BigDogPrints69

I will print this again, however.... the inner bushings do not accept a 6mm bolt with ease, the length/angle Indicator does not rotate freely and the bar that clamps the plane or chisel to the broke after 20 minutes of sharpening

The designer has replied

@ChriZ

Hi, that doesn't sound good. Are you using good-quality filament? I printed my first models with PLA from eSun, and they still work — they don’t get stuck and don’t break either. You could also try tweaking the print profile a bit — maybe increase the number of walls and the infill.

@BigDogPrints69

Replying to @ChriZ :

I printed it with Bambu PLA that was at 13% humidity in the AMS. I printed a new clamp bar, bushings and gauge with PETG from Creality and everything turned out better. I used gyroid on the clamp bar, didn't break, however it did flex a bit. printed new components with ABS-GF, will update with results.

@user_2418279126

Replying to @BigDogPrints69 :

👍

@Roger

A very interesting device But since not much force is applied here, couldn't the metallic screws be replaced with self-printed ones and perhaps included in the print file in the correct size And yes, from the appearance, I also find that the roller is too narrow and should be wider If there is a V2 of it, I will gladly print and test it Keep up the great work with such ingenious prints

The designer has replied

Show original

@ChriZ

Hello @Roger, A most intriguing suggestion I shall add screws for the printer when I have time You likely did not see the second version, the one with two rollers This version is more stable I will add the abbreviation V2 to the model name Thank you for your comment

Show original

@user_2842349577

Print Profile

Dual-roller sharpening guide

red does not bound to the plate I've washed it with warm water and cleaned it with alcohol and still does not hold down the printer head just touches it and the entire rest of the print becomes a nest

The profile uploader has replied

@ChriZ

I am very sorry that it doesn't work for you. What do you mean by red?

@Cercis

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Overall, a good concept. When sharpening a narrow chisel, the entire device feels too unstable. Two rollers would be preferable.

The profile uploader has replied

Show original

@ChriZ

I appreciate your feedback ... I will incorporate your request into the next version. ;)

@Wafi

Print Profile

Dual-roller sharpening guide

super for chisels and plane irons

Show original

@Wafi

Print Profile

0.16mm layer, 2 walls, 15% infill

super for chisels and plane irons

(Edited)

Show original

@user_1404297883

Print Profile

Dual-roller sharpening guide

allows for regular sharpening, for occasional use it's perfect

Show original

@user_306096946

Print Profile

0.16mm layer, 2 walls, 15% infill

Came out nice, thanks for the model

@user_1404297883

made with PETG, very practical for respecting the angle; thanks to the creator

Show original

@user_1855328232

Print Profile

Dual-roller sharpening guide

No usage description. It's not clear how to use it

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Griff für Terrassentür oder Balkontür

Tina s 3d druck welt

908

361

Becher für Stift oder gedöns

ossilampe

108

Schild für Hundehütte- oder Napf

Mäusel

Futterstelle für Vögel oder Kleintiere

Andy_E