Electronically-fired Cloisonné Enamel Series: Dunhuang Coffered Ceiling Pattern (Compatible with 0.2mm and 0.4mm nozzles)

I have always admired Dunhuang's coffered ceiling designs, and I have created these Dunhuang line drawings, attempting to recreate the electronic cloisonné technique using 3D printing!

Dunhuang coffered ceiling designs are highly regarded for their exquisite lines and profound cultural significance.

Please use a 0.2mm nozzle for printing to ensure precise detail rendering.

If you do not have an AMS, you can manually change filaments at layer 26.

------------Update 24.12.30----------

An updated version compatible with a 0.4mm nozzle has been added. It is recommended to use the 0.08mm High Quality preset for printing.

Also, ensure that the wall generator is switched to "Arachne"; otherwise, slicing may fail, leading to print failure.

Note that the print file has built-in filament change locations. If you need to scale the print, recalculate the filament change positions using your slicing software before printing.

------------Update 24.12.29----------

Please do not use a 0.4mm nozzle for printing at this time, as the line weight in the line drawing version is too fine, and slicing may encounter problems!

A revised 0.4mm nozzle compatible version will be re-uploaded after adjustments.

Thank you to the two kind friends in the comments section for your feedback! I apologize for wasting your filament!

------------Recommended Filament----------

PLA Black

PLA Silk Gold