Maghex Astronaut hueforge

Wall Art intended for the Maghex system by the user Superseaslug

If you want to like/boost then please do it on his works. Since i only include the .stl you need to use his files anyways so be sure to follow his tutorial.

Project: astronaut.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm

The Model is 216.44x250mm in size
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Kingroon Black Transmission Distance: 0.4
    PLA Bambulab Purple Transmission Distance: 1.6
    PLA BambuLab Basic BambuLab Green Transmission Distance: 4.8
    PLA Bambu Bright green Transmission Distance: 4.8
    PLA Kingroon White Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.3mm) swap to Purple
    At layer #10 (0.8mm) swap to BambuLab Green
    At layer #15 (1.2mm) swap to Bright green
    At layer #19 (1.52mm) swap to White for the rest.