Starlink Gen 2 Pole Mount (30mm)

Remix based off of Starlink Gen 2 Pool Pole Adapter by OggieAU - Thingiverse, I had issues printing the original model with ASA, and worried about strength where the mount flanges out.

This model is designed for a pole with an outer diameter of 30mm, with a maximum thickness of 2.8mm.

The mast I used for this is available from Bunnings in NZ, or Australia - Antsig Antenna Mast.

To print from the step or stl file, orient so that the starlink mount side is facing down towards the build plate, with supports enabled for overhangs - included .3mf is already oriented correctly, with manual tree supports painted on surfaces.

I've printed with Bambu Lab PETG-HF but will reprint in ASA if durability outside is an issue. I recommend using ASA for its superior UV resistance.

I've found a snug friction fit to be sturdy enough but should be easy enough to drill out if bolts are needed.