Magnet Applicator for magnets depth 1,2,3,4mm - Free 3D Print Model

Description

Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share.

The depth is measured so that there is only a small overlap of the magnet on top and it doesn't protrude too much.

Need will be a second glue and 2 magnets according to size.

I will be glad for comments with opinions and advice on how to improve the model.

Boost Me (for free)

Boost is FREE for You but AWSOME for ME.
What a strange society today, You can pay me for my work without spending a single dollar.

ALL DIMENSION:

2MM depth 3MM depth 1mm depth 4mm depth

1x2mm 3x3mm 1x1mm 12x4mm
2x2mm 4x3mm 2x1mm
3x2mm 5x3mm 3x1mm
4x2mm 6x3mm 4x1mm

5x2mm 7x3mm 5x1mm

6x2mm 8x3mm

7x2mm 9x3mm

8x2mm 10x3mm

9x2mm 15x3mm

10x2mm

Comment & Rating (725)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.