thermostat cover

Thermostat cover designed to beautify and add a touch of class to the wall.

thermostat measurements 58mmx58mm.

You will only need 8 mini magnets 6x3.

4 in the thermostat holder and will be pushed all the way in and glued, and 4 in the thermostat frame.

Thanks to its lightness, the thermostat holder can be fixed to the wall with double-sided adhesive tape; I used 3 6 mm wall plugs (make your choice).

The magnets in the thermostat frame were not designed flush because I deliberately wanted them to protrude so as to form a proper magnetic and mechanical seat; in this way, it is more resistant to unwanted impacts.

The frame is optional; if you have slightly crooked walls, it is recommended to print it so that no gaps are visible between the wall and the stand.