Reducing ring for cardboard spools with inner Ø102mm

This model is designed to accommodate and adapt cardboard spools with an internal diameter of 102mm for use with Bambu Lab's two-piece spools. It fits perfectly into these spools and allows for the perfect seating of the spool core. Cardboard spools with a fill weight of 0.75kg are generally compatible, such as those offered by colorfabb.

To install the adapter, one side of the cardboard spool must be carefully removed, as the opening in the spool's side is smaller than the core diameter, and thus smaller than the adapter. After inserting the adapter and attaching it to the spool section with the driver, the second side of the cardboard spool is removed, and the second spool section is attached and locked into place.

Thanks to the adapter's toothing, filament is unloaded perfectly in the AMS, but it also functions flawlessly outside of it.

The download refers to the red model shown. The two-piece spool and filament shown are not included in the download or offer. All brand names belong to their respective owners and are used solely to describe the model.

---

This model was designed to accommodate and adapt cardboard spools with an inner diameter of 102mm for use with the two-part spools from Bambu Lab. It fits perfectly into these spools and enables perfect seating of the spool core. As a rule, cardboard spools with a fill weight of 0.75kg are compatible, such as those offered by the manufacturer colorfabb.

To assemble the adapter, one side part of the cardboard spool must be carefully removed, because the opening in the side parts of the spool is smaller than the core diameter and therefore also smaller than the adapter. After inserting the adapter and attaching it to the spool section with the drive, the second side part of the cardboard spool is removed, and the second part of the spool is attached and locked.

Due to the toothing of the adapter, the filament is also unloaded perfectly in the AMS, but it also works perfectly outside.

The download refers to the red model shown. The two-part spool and the filament shown are not part of the download or offer. All brand names belong to their respective owners and are used exclusively to describe the model.

---

This model was designed to receive and adapt cardboard spools with an inner diameter of 102 mm for use with Bambu Lab's two-part spools. It fits perfectly into these spools and allows for the perfect housing of the spool core. As a general rule, cardboard spools with a fill weight of 0.75 kg are compatible, such as those offered by the manufacturer colorfabb.

To assemble the adapter, one side part of the cardboard spool must be carefully removed, because the opening in the side parts of the spool is smaller than the core diameter and therefore also smaller than the adapter. After inserting the adapter and placing it on the spool part with the driver, the second side part of the cardboard spool is removed, and the second part of the spool is placed and locked.

Thanks to the adapter's toothing, the filament is also perfectly unloaded in the AMS, but it also functions perfectly outside.

The download refers to the red model shown. The two-part spool and the filament shown are not part of the download or offer. All brand names belong to their respective owners and are used exclusively to describe the model.