Huawei GT2/GT2-e (46mm) 2021 - charging station

Since I couldn't find a charging stand for a Huawei Watch GT 2 that I liked and that also supports a "closed metal strap" (most are designed for the standard rubber straps which need to be opened, a condition metal straps never meet), I designed a suitable stand and printed it with bronze PLA material
The 3D file can be printed without support

Information January 2026:

I designed this object in 2021. It's possible that Huawei has adjusted the adapter dimensions after a few years. Since I'm not aware of any new dimensions, you could potentially create an "adapter ring" directly in the slicer. Take a cylinder with a 41mm diameter and subtract a negative cylinder with the diameter of your adapter. Additionally, subtract a cube for the connector, and you're done

Since I haven't found a charging stand for a Huawei watch GT 2 which I liked and which also supports a "closed metal bracelet", most of them are for the normally included rubber straps and these have to be open, which metal straps never are, I have a suitable one Stand constructed and printed with bronze PLA material.
The 3D file can be printed without support.

Update January 2026:

I designed this object in 2021. It's possible that Huawei has adjusted the adapter dimensions after a few years. Since I'm not aware of any new dimensions, you could potentially create an "adapter ring" directly in the slicer. Take a cylinder with a 41mm diameter and subtract a negative cylinder with the diameter of your adapter. Then subtract a cube for the connector, and you're done.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

30

Filament:
[

](http://www.amazon.com/s?url=search-alias&field-keywords=SUNLU+PLA&tag=thingiverse09-20)[ SUNLU](https://www.amazon.com/SUNLU-Filament-1-75mm-Printer-Black/dp/B07Q82HVTT?dchild=1&keywords=sunlu&qid=1618263029&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzT0RLUURRQjZCS01DJmVuY3J5cHRlZElkPUEwODg0OTEzQlVYNklURjVBUFgwJmVuY3J5cHRlZEFkSWQ9QTAzNjgzNDZ&tag=thingiverse09-20) PLA Silk silver 
 

Notes: 

I printed without support with 3 perimeters.

Post-Printing

I use double sided tape to hold the round charger/magnetic connector in place inside the round cutout.

Category: Mobile Phone