Halo Logo Hueforge
Print Profile(1)
Description
Hi all, here we have created a Halo logo Hueforge. We think this is a great representation of the iconic game Logo. This print uses 4 colours.
Enjoy and share your results.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x126.03mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.1mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA Hatchbox White Transmission Distance: 10
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Grey
At layer #15 (1.28mm) swap to Marine Blue
At layer #17 (1.44mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)