Xbox two Controller Holder tentacle stand - Free 3D Print Model

Search models, users, collections, and posts

Mad power

Tools>Organizers

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.28mm layer, 2 walls, 5% infill

Designer

4.8 h

1 plate

5.0(65)

96% scale for A1 Mini - 0.28mm layer, 2 walls, 5% infill

4.9 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

537

1068

1.4 k

749

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

⛽ A BOOST is like fuel for my projects! ⛽ It costs you nothing, but you help me fly. Heartfelt THANKS! ✈️

Boost Me (for free)

Click here to support me; it’s free and helps me sustain my work!

Membership

MakerWorld commercial license

Join

IF YOU WISH TO SELL MY CREATIONS YOU MUST PURCHASE A COMMERCIAL LICENSE, AVAILABLE HERE OR ON MY ------ PATREON

If you intend to sell this model, please consider the creator and the countless hours invested in its development

Xbox two Controller Holder tentacle stand, ideal if you own two controllers!

If you print it, please share photos, including those showcasing different colors!

Discover more models here

Boost Me (for free)

⛽ A BOOST is like fuel for my projects! ⛽ It costs you nothing, but you help me fly. Heartfelt THANKS! ✈️

Membership

🛒 "Do you want to sell prints of this model? The commercial license allows you to: ✅ Print and sell legally ✅ Earn by selling physical prints ✅ Produce without quantity limits Unlock everything today → [Purchase commercial license]"

Join

xbox two controller holder tentacle

xbox one controller holder

double

Comment & Rating (98)

@cbaker294

Print Profile

0.28mm layer, 2 walls, 5% infill

I need a stand for 2 Xbox controllers and chose this one because it looked interesting. I'm very happy that I printed this one. I have had many compliments. I used silk pla and it came out perfect.

The profile uploader has replied

@Mad_Power

😍

@B.Ricoo94

Print Profile

0.28mm layer, 2 walls, 5% infill

I've printed a bunch of model, that's the only picture. It was perfect! Thanks!

The profile uploader has replied

@Mad_Power

😍

@lega4

Boosted

Print Profile

0.28mm layer, 2 walls, 5% infill

Scaled down 96% to fit into A1 Mini (uploaded print profile for those who want to reuse) as the original model is just a few mm bigger than 180mm A1 mini can handle. It actually worked better than I expected, gamepads fit quite good, there is a gap on the bottom, but given that it was the simplest way to make it in A1 Mini I think it's great. Would appreciate the designer to make proper adjustments though. I only noticed when uploading p.p. that layer height is set to 0.28mm. Given the appearance and details of the model, I do not understand why is it so, if I'd be printing it again, I really recommend finer height, at least default 0.2mm, but maybe even finer to get less layer visibility and better look. Supports came off model really easily, but the bases were stuck to the board, had to use metal scraper and spend 5 minutes detaching them. For sure there can be some support settings to make them easier to remove from the board. Printed in Bambu Silk multicolor PLA, looks amazing.

The profile uploader has replied

@Mad_Power

🥰thk

@SfTimmy

Boosted

Print Profile

0.28mm layer, 2 walls, 5% infill

Love it.

The profile uploader has replied

@Mad_Power

😍thk

@user_309915597

Boosted

I used a colored filament, which I think should have a little more temperature. But it's an adjustment that I have to make. The project is excellent, I recommend it. It turned out very beautiful.

The designer has replied

@Mad_Power

😍

@MamuniCZ

Boosted

Print Profile

0.28mm layer, 2 walls, 5% infill

Great print

The profile uploader has replied

@Mad_Power

🥰thk

@rojogrande

Print Profile

0.28mm layer, 2 walls, 5% infill

awesome

The profile uploader has replied

@Mad_Power

very good 🙃

@Hemi6Spd

Boosted

Print Profile

0.28mm layer, 2 walls, 5% infill

Printed with PLA Silk Color change used the default setting for Bambu's PLA Silk. Worked great! Remote printed from phone!

The profile uploader has replied

@Mad_Power

❤️

@carlosthefourth

Boosted

Print Profile

0.28mm layer, 2 walls, 5% infill

perfect

The profile uploader has replied

@Mad_Power

😍

@user_2730294072

Boosted

Print Profile

0.28mm layer, 2 walls, 5% infill

Looks great and no issues!

The profile uploader has replied

@Mad_Power

😍thk

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Phone stand

K2 Tech Designs

70.2 k

12.5 k

xbox stand controller tentacle

Mad power

11 k

4.4 k

Design Headphone Stand

Deltaprints

39.8 k

9.5 k

iPad / Tablet Stand Riser

Meyui

39 k

18.8 k