Search models, users, collections, and posts
Fanatec DD Power Supply 8020 Mounting Brackets
IP Report
Print Profile(1)
0.2mm layer, high-strength
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
93
329
25
15
469
236
Released
Bill of Materials
List other parts
- Bolts x 4: M8
- T-Nut x 4: M8
Description
Mounting brackets for the Fanatec DD1/DD2 power supply for attachment to 8020 aluminium extrusion profile.
The brackets are designed to be a tight fit for the power supply without obstructing the power supply ventilation. Each bracket has two integrated t-slot pins for alignment and support while fastening the brackets to the aluminium profile with M8 bolts and t-slot nuts.
Ideally these should be used with 160mm profile so that 2 bolts can be installed per bracket, but these are usable on 120mm profile with a single bolt per bracket.
Do not rely solely on the integrated t-slot pins for support. The brackets should be bolted directly to the profile.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (25)