A distant fragrance betrays its presence, not snow; Winter plum blossoms, hardy plum blossoms, bookmark
Print Profile(2)
Description
Boost Me (for free)
Your support is needed
Greetings, Makers!
This is a 61x144mm bookmark. It requires three colors and is configured for AMS. Otherwise, filament changes require pausing (followed by manual unloading and loading).
The print profile has been tuned for Hueforge. I recommend minimal modification.
HueForge Description
Print at 100% infill, 0.08mm layer height, and 0.16mm bottom layer height
Model size: 61x144mm
You can print with higher layer heights below the minimum depth of 0.48mm
Maximum depth is 2.5mm, actual depth is 2.4mm
Filaments Used:
PLA Black Transmission distance: 0.3
PLA White Transmission distance: 6
PLA Red Transmission distance: 4
This print uses 3 unique filaments
Change Instructions:
Start with black
Switch to white at layer 7 (0.64mm)
Switch to red at layer 15 (1.28mm)
Switch back to white at layer 21 (1.76mm) until the print is finished
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)