PXN-CB1 button box adapter (RAM mount to VESA 100)

Introduction

This is an adapter to mount the PXN-CB1 to a 8040 profile sim rig with a RAM mount. The linked RAM mount is made from black aluminium and fairly strong so the button box doesn’t shake while touching.

The links below are affiliate links and help me continuing providing designs for simracing.

PXN-CB1 Button box:

https://s.click.aliexpress.com/e/_oouqWyx

What you need:

For your convenience, Amazon and Aliexpress links are listed below. You only need to buy once per link.
 

1x RAM link (25mm/1“)

https://amzn.to/40da7qw

https://s.click.aliexpress.com/e/_olljxYB

4x M4x16 inbus

https://amzn.to/3BMuTUy

https://s.click.aliexpress.com/e/_oCngY0F

2x M4 t-nut for 4040 profile (Nut 8)

https://amzn.to/4gxNhQi

https://s.click.aliexpress.com/e/_oCpCDtv

Instructions:

1. Print the model. 
2. Use the 3 screws that come with the PXN-CB1 button box to attach one end of the RAM mount to the printed model.
3. Attach the printed model with 4x M4x16mm bolts to the button box.
4. Attach the RAM mount to the 4040/4080 simrig with 2x t-nuts and 2x M4x16mm bolts.

5. Enjoy.