Deck Box - Water
Print Profile(1)
Description
Deck box designed around a sleeved 60 card deck. Holds the deck securely. There's two options for top front plate, one is blank, the other has a name. Name can be customized using Bambu Studio, but make sure you sit the text flush against the bottom surface or it will mess up the print. If you are printing from the App (Bambu Handy), skip the Top Front Plate with Text and print the plain one.
Box frame rings will need printed with 3mm brim and supports, but everything else prints fine without that. Apply a slight amount of glue to the channels in the box frame for each panel before sliding the panels into place. Apply glue to the top of the panels and the four posts before setting the appropriate ring on top, making sure to catch the raised portions of each post in the catches within the ring. Repeat for the top portion of the box. The logo has an alignment slot in the ring for the bottom part of the box, and will need glued in place.
More boxes coming soon. Fire and Water are releasing simultaneously, followed by the other boxes as I get filament.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)