Search models, users, collections, and posts

Lian Li O11 Dynamic Evo XL Fan Duct

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L

0.2mm layer, 3 walls, 10% infill, rectilinear infill
0.2mm layer, 3 walls, 10% infill, rectilinear infill
Designer
57 min
1 plate
4.4(8)

Open in Bambu Studio
Boost
111
278
20
5
251
110
Released 

Description

This is a fan duct for the Lian Li O11 Dynamic Evo XL side fans. This duct fits tightly to the side panel and allows each fan to use as much of the mesh as possible horizontally

 

The 120mm I personally use and fits very well. The 140mm was also confirmed fitting well!

 

Enjoy!

Comment & Rating (20)

(0/1000)

Would it be possible to also make an option for 140mm fans ? I have a Lian Li Dynamic Evo XL ROG case, but instead of using 120mm fans there, I'm using the Noctua 140mm. Are you using pull-push configuration ? or no radiator there? just fans?
The designer has replied
designer
1
Reply
I can try one for a 140 but don't have 140mm fans to test fit Mine's push pull here with a 360mm 60mm thick radiator. In this case exhausting at the radiator and intake from the top to blow the warm air away from me (works really well). Cooling a 5950x and 3080ti
1
Reply
A -140 3mf has been uploaded, do you mind testing fitment?
0
Reply
Replying to @joshuasolanes :
I got the 140mm file, I will print and test on a Noctua 140mm. Printing! This orientation apparently does not require supports. We will know in 2 hours :-)
(Edited)
designer
2
Reply
Boosted
Love your work but it was slightly too big for the o11 deBauer, so I modified to fit. I also made the screw holes the 5.5mm and used a PLA print profile https://makerworld.com/en/models/1170016-lian-li-o11-derbauer-fan-duct#profileId-1178137
The designer has replied
designer
3
Reply
Very nice job!
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
This design has great potential for people who run cooling fans on the back side. If you don't and run your fans on the front because you have mounted your radiator on the top and are using LCD fans, then these won't work because they aren't tall enough. But other than that these work well except for some issues with the corners around the top. other than that this is a very clean idea for ensuring the air is pushed out the side panel.
profile
3
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
pretty nice
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
Wall too thin
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
profile
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
profile
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
profile
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
profile
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill, rectilinear infill
0
Reply