Katana Collapsible Strong

Katana Collapsible Strong

Dimensions [mm] 720 x 48,25 x 60,40

This is a collapsible Katana. 

In the profile there is a Build Plate for all parts in one color 

and one Build Plate each for Katana parts and handle in different colors !

The sword parts are extra thick, ca. 1.27 mm. 

This katana is much more stable than a print-in-place sword ! 

!! It is recommended to clean the print bed before printing !!

It is recommended to use the “SuperTack” build plate  ! 

With the textured plate, “3DLac” may be an advantage  !

The Textured Plate also worked well for me !!!!!

Layer height : 0,2 line width : 0,4

Walls 3; top 1,0mm ; bottom 1,0mm; Infill 15%

Print time P1S ~  3h 59min | A1 Mini ~ 4h 53min  - all Parts on 1. Build Plate

Bambu Lab PLA Matt Charcoal ; Bambu Lab PLA Basic Jade White

Bambu Lab PLA Basic Orange ; Bambu Lab PLA Basic Black

Bambu Lab PLA Basic Grey

MakerWorld : https://makerworld.com/en/@sweb3791

My Models : https://www.printables.com/de/@CB_384764/models