Print Profile(1)
Description
A pin board in the shape of a Pokeball.
Print the base with 100% infill so as the board gets weighed down with pins it won't tip over.
The area for pins on the top half is .4mm taller than the bottom half. This way you can print in 3 colors even without an AMS and avoid wasteful filament changes.
The base has the symbols for all the Pokemon types. If you would like a base with no pattern check my Makerworld page.
Depending on the tolerances of your printer the base may need to be filed out or the main piece glued in.
If you need pegs to hang keychains or pin pictures to your pinboard, check out the model “Pinboard Pegs” on my page
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)