Pokemon Corsola (Corsola), jewelry display and storage device, no AMS required - Free 3D Print Model

Search models, users, collections, and posts

peach

Toys & Games>Characters

IP Report

Print Profile(3)

All

A1 mini

X1 Carbon

X1E

H2D

P1S

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 8% infill

Designer

7.5 h

3 plates

4.9(28)

Reinforced Supports (This configuration only includes the pink part; please print the original file for other components)

Designer

6.6 h

1 plate

5.0(3)

Adjust infill to 15%

Designer

8.6 h

3 plates

5.0(3)

Open in Bambu Studio

Boost

591

1373

369

226

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

Thank you for your support, trainers! This encourages me to continue creating!

A display and storage unit for Corsola amulets, measuring 15.6*16.5*16cm. Jewelry can be hung from the arms, head, and dorsal horns, or stored directly within the body. It is said that Corsola's horns are highly prized treasures—display your most cherished jewelry upon them!

I used only 8% infill, resulting in excellent stability and preventing tipping. If you are concerned about instability from heavy jewelry, you can add weights inside the body cavity.

Assembly Instructions: The numbered white components embedded in the body correspond to the positions shown in the diagram below. No glue is required; simply snap the pieces together.

The arrow on the white base indicates the front. Take care not to reverse it when attaching the lid.

Pokemon

Corsola

Jewelry Display Stand

Storage

Jewelry Storage

AMS-Free

Comment & Rating (57)

@Acornaut

Boosted

It's so cuute an amazing!! Nice model, nice printing. Pieces fit great, only needed to glue the eyes. Model Boosted! The only detail is the horizontal line all across between the legs and the begining of the belly. Printed in Rose Gold at 0.12 layer height. Thanks!!

The designer has replied

@PeachWinter

Thank you for your support! Regarding the issue with the horizontal lines, after recent research, this might be shrinkage lines caused by excessive cooling time during the top layer print. I've tried adjusting print parameters, but with little noticeable improvement. Current experience suggests printing with PLA Basic filament in warmer ambient temperatures yields better results.

Show original

@Acornaut

Boosted

Replying to @PeachWinter :

Thank you for the advice! I'll try it later :)

@Konnkrete.creat

Boosted

Print Profile

0.2mm layer, 2 walls, 8% infill

printed great my daughter loved it

The profile uploader has replied

@PeachWinter

Wonderful I’m so glad she loves this piece

Show original

@HoloJirachi

Boosted

Print Profile

0.2mm layer, 2 walls, 8% infill

I love this so much! Very awesome print, only issue I had was that the small white bits had some bed adhesion issues for some reason.

The profile uploader has replied

@PeachWinter

I'm delighted you enjoy this creation! Applying adhesive to the print usually resolves adhesion issues

Show original

@user_1303838961

Boosted

Print Profile

0.2mm layer, 2 walls, 8% infill

Good work. Thank you!!!

The profile uploader has replied

@PeachWinter

Thank you for your support and feedback! I'm thrilled you enjoy this creation!

Show original

@Meagleson88

Boosted

Made this for my mom's shop! She uses it every time to hold her jewelry! Thank you for such a wonderful design!

The designer has replied

@PeachWinter

I'm thrilled to see this creation could be helpful in your mother's shop! This is fantastic! Empowering Pokémon 3D prints with practical, real-world functionality is precisely what drives my creative endeavors

Show original

@Xiao_Zhi

Print Profile

Reinforced Supports (This configuration only includes the pink part; please print the original file for other components)

Very nice. Thanks!

The profile uploader has replied

@PeachWinter

So cute! Thank you for your kind words, I'm thrilled you enjoy this creation!

Show original

@user_3402341694

my app never lets me rate but this is 5 stars all the way. printed flawlessly, and is massive on the A1 mini. I won't use it for jewelry but it is an awesome display piece with a hidden compartment. thanks for this model!

@jule_cosplay

Printed one in the Shiny version and one normal tuned out perfectly. 💕

@Maaarvin

Boosted

its too cute, keep up the amazing work, i love it !!!

@Anuwed

Boosted

Print Profile

0.2mm layer, 2 walls, 8% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.