狐改FOX

cover

Screenshot_20241225_235728_edit_3405135830266249.jpg

Screenshot_20241225_235743_edit_3405151033673066.jpg

plate_1.png

plate_2.png

2024-12-25_47992125b2275.jpg

2盘打印，第一盘视频中使用的是荧光绿耗材，常态为透明色，但夜间呈现绿色。第二盘则是橙黄色，因视频采光原因导致并不是很明显。

Two-plate print, the first plate in the video uses fluorescent green filament, normally transparent but exhibiting a green glow at night. The second plate is orange-yellow, though the video lighting makes this less apparent.

0.2mm layer, 2 walls, 8% infill

<figure class="media"><oembed url="https://www.bilibili.com/video/BV1vXCqY5EcQ/?vd_source=ded03c3265d1650b6a0f879b51d6dd37"></oembed></figure><h2>模型整体组装需要使用4个m3*4（高度）*5（直径）规格的热熔螺母，2颗m3x14的杯头螺丝，2颗m3x10的杯头螺丝。</h2><h2>弹簧尺寸为线径0.4外径4长度15mm！！！！！视频里的弹簧尺寸是错误的！！！</h2><h2>之后将模型固定在打印机上则需要2个m3的船型螺母（或者T型螺母）以及2个m3x10的杯头螺丝。</h2><h2>请注意如果打印件运动卡死，请适当打薄定位桩或者扩大限位槽。</h2><h2>可适当在弹料槽的位置粘贴金属胶带防止废料粘到弹料槽上面。</h2><h2>弹料宏： </h2>[gcode_macro Clear_Nozzel] variable_clear_temp:250 variable_clear_x: 51.5 variable_clear_y: 306 variable_clear_y_safe: 25 variable_clear_retract: 40    gcode:     G28 X Y  #归位xy     G1 X{clear_x} Y{clear_y - clear_y_safe} F5000     G1 X{clear_x} Y{clear_y} F8000     M109 S{clear_temp}     G1 E{clear_retract} F400 #冲刷     M106 S255     G4 P3000     M104 S140     M106 S0     G1 X{clear_x} Y{clear_y - clear_y_safe} F15000     G1 X{clear_x} Y{clear_y} F15000     G1 X{clear_x} Y{clear_y - clear_y_safe} F15000     G1 X{clear_x} Y{clear_y} F15000     G92 E0     G1 X{clear_x} Y{clear_y - clear_y_safe} F15000

<figure class="media"><oembed url="https://www.bilibili.com/video/BV1vXCqY5EcQ/?vd_source=ded03c3265d1650b6a0f879b51d6dd37"></oembed></figure><h2>Assembly of the model requires four M3x4 (height) x5 (diameter) heat-set inserts, two M3x14 pan head screws, and two M3x10 pan head screws</h2><h2>The spring dimensions are 0.4mm wire diameter, 4mm outer diameter, and 15mm length The spring dimensions in the video are incorrect</h2><h2>Securing the model to the printer requires two M3 boat-shaped nuts (or T-nuts) and two M3x10 pan head screws</h2><h2>Note that if the printed parts are jammed, please carefully thin the locating pins or enlarge the limit slots</h2><h2>Consider applying metal tape to the filament chute to prevent waste material from adhering</h2><h2>Filament Purge Macro: </h2>[gcode_macro Clear_Nozzel] variable_clear_temp:250 variable_clear_x: 51.5 variable_clear_y: 306 variable_clear_y_safe: 25 variable_clear_retract: 40    gcode:     G28 X Y  #Home xy     G1 X{clear_x} Y{clear_y - clear_y_safe} F5000     G1 X{clear_x} Y{clear_y} F8000     M109 S{clear_temp}     G1 E{clear_retract} F400 #Purge     M106 S255     G4 P3000     M104 S140     M106 S0     G1 X{clear_x} Y{clear_y - clear_y_safe} F15000     G1 X{clear_x} Y{clear_y} F15000     G1 X{clear_x} Y{clear_y - clear_y_safe} F15000     G1 X{clear_x} Y{clear_y} F15000     G92 E0     G1 X{clear_x} Y{clear_y - clear_y_safe} F15000

Print Profile(1)

Description

Assembly of the model requires four M3x4 (height) x5 (diameter) heat-set inserts, two M3x14 pan head screws, and two M3x10 pan head screws

The spring dimensions are 0.4mm wire diameter, 4mm outer diameter, and 15mm length The spring dimensions in the video are incorrect

Securing the model to the printer requires two M3 boat-shaped nuts (or T-nuts) and two M3x10 pan head screws

Note that if the printed parts are jammed, please carefully thin the locating pins or enlarge the limit slots

Consider applying metal tape to the filament chute to prevent waste material from adhering

Filament Purge Macro:

Comment & Rating (1)

License

Related Models

Voron Trident Multicolor Wipe-Clean Filament Guide U2933