Victorinox 58mm Plain Scale

Check my collection of Swiss Army Knife Scales (Click Here)

These custom-designed 3D printable plates are tailored for the Victorinox (58 mm) Swiss Army Knife. it has the same dimensions as the original ones.

If you want a pocket clip for this knife model (Click here)

Installation Instructions:

1. Remove the Original Plates:

• Use a small flat-head screwdriver or pry tool to carefully lift the edge of one of the original plates.

• Start at the lanyard hole or a corner where the plate is less tight.

• Slowly work your way around the plate, gently prying it off. Avoid excessive force to prevent damaging the knife.

2. Clean the Knife Body:

• Wipe away any residue or adhesive left from the original plates using a damp cloth.

• Ensure the surface is dry and free of debris.

3. Attach the 3D-Printed Plates:

• Align the 3D-printed plate with the knife body, ensuring the snap-fit tabs align with the corresponding points on the knife.

• Press the plate firmly into place starting from one end and moving toward the other until you hear a click or feel it snap securely -Don't worry about pressing it too hard it is normal.

Your Victorinox 58mm Swiss Army Knife is now customized with your unique plates!