Search models, users, collections, and posts
Wafer Jiggler Lock Pick Toy, Cosplay
IP Report
Print Profile(2)
0.2mm layer, 6 walls, 25% infill
Designer
1.9 h
3 plates
Both Types - 0.2mm layer, 4 walls, 100% infill
42 min
2 plates
Open in Bambu Studio
Boost
614
1583
69
14
1.2 k
817
Released
Description
This model is a toy used for display, cosplay, and learning purposes only. |
This tool integrates the tensioner, allowing one to open low security locks without needing a separate tensioning tool.
1mm, 1.4mm, or 1.8mm thickness
Print with 6 walls (part should be solid, 100% infill)
Use IRONING feature in slicer to smooth out the top surface for better aesthetics.
Use stiffer materials such as PLA, PLA-CF.
ABS or PETG are more flexible which is bad for printed lock picks.
Boost Me (for free)
Check out Lock Picks, OTF Pick, Rake, and Notch Decoder too:
https://makerworld.com/en/models/871283#profileId-823277
https://makerworld.com/en/models/890780#profileId-847397
https://makerworld.com/en/models/884829#profileId-839694
https://makerworld.com/en/models/874039#profileId-826439
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (69)