user_1441914251

cover

065ceb45aee93a3e77486c7ee511968.jpg

66ced52159c9b555f648b92dd63dca2.jpg

21a255f138808de265702eaf0c93d8f.jpg

9504499849bc2e40a6f08c86fc9340d.jpg

117a9f490e435d9fcdfae884126569b.jpg

9268017bf8215c507218af27ff21aca.jpg

ad256fc1b08c573581429959f774066.jpg

plate-1

plate_1.png

plate_2.png

plate_3.png

plate_4.png

2024-12-24_292f8deaa14d6.jpg

有三个版本，一个为平面版，需要ams：一个是浮雕版，无需ams，手动设置暂停层换料即可。尺寸最小为70%，如果需要继续缩小请使用0.2mm喷头，可以继续放大，打印平台可以放下就行。目前尺寸为207*176*1mm表现效果非常棒，线条清晰，图案还原，如果当窗花该厚度足够了，如果需要制作为立牌建议增加厚度至2mm以上。盘二无需打印。第三版本（盘4）非必要不要打印，玩法为在打印平台上垫上a4纸使用磁铁固定，将模型厚度调为一层，直接打印在纸上，然后根据轮廓裁减掉多余纸张即可。&nbsp;&nbsp;There are three versions, one is a flat version, which requires AMS: one is an embossed version, no AMS is required, and it is possible to manually set the pause layer to change the material.The minimum size is 70%, if you need to continue to shrink, please use a 0.2mm printhead, you can continue to enlarge, and the printing platform can be put down.The current size is 207 * 176 * 1mm, the performance effect is very good, the lines are clear, the pattern is restored, if the thickness of the window grille is enough, if you need to make it for the stand, it is recommended to increase the thickness to more than 2mm.Tray 2 does not need to be printed.The third version (disk 4) does not print unless necessary, the gameplay is to pad A4 paper on the printing platform and fix it with a magnet, adjust the thickness of the model to a layer, print it directly on the paper, and then cut off the excess paper according to the outline.

0.2mm layer, 2 walls, 15% infill

XYugia

1000022347.jpg

P1S自带的 0.4mm喷头可用，当然放大了模型，保证细节同时切薄了白色部分（以及消除了原模型的神秘镂空夹层），材料从同尺寸模型的 58g降到了 47g&nbsp;打印完厚度较薄，1mm以上，（强度你觉得可以就没问题）但作为装饰很合适（太厚会显得突出来一块）

The 0.4mm nozzle that comes with P1S is usable, and the model has been scaled up to ensure detailsAt the same time, the white parts were thinned (and the mysterious hollow interlayer of the original model was removed), reducing the material from 58g to 47g for models of the same size&nbsp;After printing, the thickness is relatively thin, over 1mm (if you think the strength is acceptable, then it's fine)But it's very suitable as a decoration (being too thick would make it protrude too much)

0.4mm nozzle available, model scaled up and thinned, printing plate size for P1S 0.08mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

cls生产速度太慢了，买了还要120天发货，等他发货春节都过去了，也就没什么意义了，晚上越想越气觉得自己先设计制作。，分多个版本有齐平的和浮雕的两个版本，可以选自己喜欢的版本下载，材料消耗不多打印效果非常棒。

The cls production speed is too slow, and it will take 120 days to ship after purchase. By the time it ships, the Spring Festival will be over, which is meaningless. I was increasingly angry last night and decided to design and make it myself.There are multiple versions, including flush and relief versions. You can choose your favorite version to download. The material consumption is not high, and the printing effect is excellent.

Print Profile(2)

Description

Comment & Rating (2)

License

Related Models

Fortune and Treasure Window Lattice Paper Cut

Print Profile(2)

Description

Comment & Rating (2)

License

Related Models