HUEFORGE GMC
Print Profile(1)
Description
Boost Me (for free)
Do you like my project? Would you like to leave me a boost so I can always create new things.
HUEFORGE GMC
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 4
PLA Protopasta Out of Darts Orange Transmission Distance: 11
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions: Start with Black
At layer #4 (0.44mm) swap to Jade White
At layer #10 (0.92mm) swap to Out of Darts Orange for the rest.
ADVISE:
If you want to change the color of the car, instead of orange, use the one you like best.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)