Print Profile(2)
Description
This box is designed to hold a 23cm long incense stick with a diameter of 1.5mm.
It prints in 4 parts
- Top cover
- Insert for the cover: choose the one you like, there are 3 japanese themed ones I have designed and one where you can choose the infill (for example hexagons, triangles or hilbert curve). After printing simply glue it to the top cover. Mine came out as a push fit, so you can skip the glueing and exchange different top designs as you wish.
- Middle box
- Bottom - storage part for spare incense sticks
There are holes and pauses in the print to insert magnets to the box and bottom part. It uses 4 rectangular 5x10x3mm magnets (mine were actually smaller so the holes are 4.8x9.2x3mm, i can adjust them to different sizes if necessary). They weren't really important in my case as the bottom had a good friction fit, but I have added them to make sure the storage part stays attached.
Boost Me (for free)
Enjoy my 3D models? Leave a boost to show your support! 🚀
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (102)