Sandpaper Holder, Sandpaper Polisher, Wall Mount (manual sander, sandpaper tools) - Free 3D Print Model

Search models, users, collections, and posts

花见花会开

Tools>Hand Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4.5 h

1 plate

4.6(21)

Open in Bambu Studio

Boost

427

1251

700

285

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

Thank you for your boost, I will bring you more surprises

This is a large-scale sanding tool requiring no parts beyond 3D-printed components, typically used for woodworking or wall painting applications, although equally suitable for smoothing extensive models!

Update:

Dowels now incorporate securing holes, enabling filament insertion for enhanced dowel fixation.

、

90°Flocked Sandpaper Sanding Block for Internal Angles

Boost Me (for free)

Thank you for your support!

Comment & Rating (23)

@user_2340037246

Print Profile

0.2mm layer, 2 walls, 15% infill

Works very well

@ViniciusSuvinil

Print Profile

0.2mm layer, 2 walls, 15% infill

The part printed very well, it's just plug and play, the assembly is very easy, I used a petg that I had left over

(Edited)

Show original

@user_1199768623

It was not for the A1 mini, but I was able to print it beautifully at 78% size with PLA+. I think PLA+ is sufficient since it is not used frequently

Show original

@DanielOttl

Print Profile

0.2mm layer, 2 walls, 15% infill

top👍🏻

@user_3346359437

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice item, however the handle shows stringing on the underside

Show original

@user_3475287677

Print Profile

0.2mm layer, 2 walls, 15% infill

works good

@3DPrintinDude

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice large sander with a comfortable handle to work with. I like the size and I was able to make 3 sanding sheets by cutting up one belt sanding belt into multiple pieces.

@Reddog

Print Profile

0.2mm layer, 2 walls, 15% infill

Its fine

@user_3569630195

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Adhesion problems with the dowels. I had to add brims to them. The dowels then didn’t fit properly in the holes. I had to drill out the holes to get them in, but then it was a nice and snug fit.

@MLLO

Printed it - scaled to 93% and set its width to 93mm, it fitted perfectly with my existent sanding papers. Thanks <3

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.