Arcane Jinx Fishbones
Print Profile(1)
Description
Boost Me (for free)
If you like this, please check out my other Arcane HueForges or consider boosting me :)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200.08x250mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Cyan Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.12mm) swap to Cyan for the rest.
It is NOT necessary to add the layer changes manually. When you open the file directly from Bambu Studio and slice it, the layer changes will appear automatically AFTER slicing along with the prime tower.
If for whatever reason you need to add the layer changes manually, here is a guide. (These example pictures are from a DIFFERENT HueForge I created):
- Open the file and slice it.
- Go to the “Preview tab”
In the preview tab, look for the small round green slider on the right side of the screen. (Shown by the yellow arrow).
- Move the slider to the layers listed above.
Right click on the slider when it´s on the correct layer and a small menu will pop up.
- Select “Change Filament”
- Select the filament you would like to choose
Slice again after adding all filament swaps.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)