Search models, users, collections, and posts
Bigtree Tech Panda Branch V1 enclosure
IP Report
Print Profile(2)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
9.5 h
1 plate
0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
Designer
4.7 h
1 plate
Open in Bambu Studio
Boost
185
420
124
46
836
455
Released
Description
After printing the original enclosure from Bigtree tech i found the way it was haning on the bracket not a nice solution. Besides that, the Panda Branch V1 comes with 2 M3 screws suitable for using in the back of the vertical beams of the printer.
So i decided to overhaul the design, making it cleaner, multicolor, change the labeling on the enclosure and use the mentioned screws instead of the bracket. The new way of mounting also make the orientation so that the cables move away backwards instead of the side.
Update 16-01:
- added print profile for printing the enclosure with 0.4 mm nozzle
- added some additional space for the mounting screws
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (124)