deadmau5 head Christmas ornament

Print slow and steady. I recommend cool plate with glue stick or super tack plate. Exercise caution if using textured pei plate as some parts do not have a lot of surface contact with plate and may dislodge during print and result in a fail. Printed in 3 parts, an upper shell, a lower shell, and an internal accent piece. There is a relief V-shaped cut in the accent piece to allow it to flex a bit so the eyes can be fit through the upper shell. it flexes just enough to have a pretty snug fit and not crack or break, even with PLA. I recommend a fast acting glue like superglue to assemble, only piece that needs the glue is the lower shell, as the upper shell and accent piece pretty much press fit into each other.