Search models, users, collections, and posts
F22 Fighter Jet Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
8.8 h
1 plate
Open in Bambu Studio
Boost
23
69
11
5
139
25
Released
Description
Jet firing missiles. Enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200.01x200.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Overture Orange Transmission Distance: 7.1
PLA Overture Highlight Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Orange
At layer #20 (1.68mm) swap to Highlight Yellow
At layer #30 (2.48mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (11)