LTT Gridfinity Screwdriver Holder V1

Before You Print - I Created a V2 with Magnetic Bit Storage that holds up to 24 additional bits! And If that's not enough I made 1x1 Magnetic Bit Holders! These are shown below, or you can view my entire LTT + Honeycomb Gridfinity Collection HERE. 

This is my take on a LTT Screwdriver Holder based on the Refined Gridfinity design, with slot in 6x2 magnet holes on the corners for the glue adverse. I also created a 1x1 Vertical version which you can find HERE. 

 I included a neat Honeycomb/hex Pattern design on it, which is actually what inspired the entire design, another creator on here has a post up of a similar bin w the hex pattern on top, however the uploaded design lacks this feature, so I made it myself. The hex Pattern is actually recessed into the bin so it still fits perfectly within the standard 6x1 footprint. 

Feel free to share any feedback, or idea's for future Improvement, I will be uploading a file with a cylinder negative so you can adjust as needed a cutout for easier pick up.  Considering adding little cutouts for bits as well, let me know if this is something you would be interested in. 

STLs are included if needed, as well as a blank 6x1 bin with the Hex Pattern if you wanted to remix it for your own design.