SPD Red Ranger Helmet
Print Profile(2)
Bill of Materials
Description
SPD Red Ranger Helmet
Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268
Uses 8x2mm Magnets, 22 in total. - Be sure to use the magnets in the BOM as they were tested and work properly.
Helmet Main has painted supports as the prime tower is 100% needed for a clean print and can not fit without the custom supports.
The lens I included can be used as a templet for the Face Shield or for display.
For cosplaying Lens I recommend - https://www.amazon.com/gp/product/B0D2NHXCLV/ref=ox_sc_act_title_2?smid=A1U6SLB6T92CWN&th=1
Most people seem to buy this one - https://www.amazon.com/gp/product/B002VECKRO/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1
Once mine come in I will let you know how they perform.
The side lights were made to replicative the original Power Rangers helmet car light look.
This took some time to replicate correctly.
Using Red Transparent Filament and the settings I provide in the Print Profile you to can replicate the same look.
I personally think this detail sets my model above and beyond the others.
Pictures can be found in the Print Profile.
I used clear transparent filament as It was needed for testing purposes. You will want to use a red or dark red.
Enjoy
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (59)