Hueforge Firefox Lady
Print Profile(1)
Description
Here I present my first self-created Hueforge. I hope you like it. If you have printed it, please post pictures, thank you.
I can also imagine using glow-in-the-dark colours. That would certainly look good too.
Here is the matching frame: https://makerworld.com/en/models/709013#profileId-868169
Print at 100% infill with a layer height of 0.08mm and a 0.16mm base layer
The model measures 222.5 x 139.5mm
Higher layer heights below the minimum depth of 0.48mm are permissible
The maximum depth is 2.2mm, and the actual depth is 2.1mm
Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Red Transmission Distance: 4
Bambu Lab PLA Matte Mandarin Orange Transmission Distance: 3
Bambu Lab PLA Matte Lemon Yellow Transmission Distance: 4
This print utilizes four distinct filaments
Swap Instructions:
Begin with Black
At layer #6 (0.56mm) switch to Red
At layer #14 (1.2mm) switch to Mandarin Orange
At layer #19 (1.6mm) switch to Lemon Yellow for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)