Search models, users, collections, and posts
Boondocks Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill, ironing, 4 colors
Designer
4.6 h
1 plate
Open in Bambu Studio
Boost
29
64
2
2
29
10
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.44mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Jade White
At layer #5 (0.48mm) swap to Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Beige for the rest.
Documentation (1)
Other Files (1)
boondocks-2_describe.txt
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)